Paving Cleaning in Perth & WA
Paths, pool surrounds and courtyards go grey and green faster than anything else on a property. Cleaning paving properly means dealing with the joints and the efflorescence, not just the surface.
Fully insured
Public liability cover
Free fixed quotes
No variations on the day
Before & after photos
Proof on every job
Perth & WA wide
Local, owner-operated
What Our Paving Cleaning Includes
Paving is a jointed surface, and that is what makes it different from a slab. The dirt, weeds and moss live in the joints, and blasting them out without re-sanding afterwards leaves the pavers loose and moving. We handle the whole system.
- Weeds, moss and grass lifted from every joint
- Surface cleaned at pressure matched to the paver material
- Efflorescence — the white salt bloom — treated rather than just wetted
- Black spot and lichen treated at the root where established
- Edge restraints and garden borders cut in by hand
- Joint sand replacement quoted and available where washout has occurred
- Pool surrounds cleaned with attention to slip resistance
- Full rinse and before-and-after photos on completion
How the Job Runs
Paving looks like a simple job and often is not. The material and the joint condition decide the entire approach.
1. Identify the paver
Limestone, clay brick, concrete paver, travertine and reconstituted stone all take different pressure. Getting this wrong is how paving gets permanently pitted.
2. Clear the joints
Weeds, grass and moss removed from joints first. Cleaning the surface while the joints are still full just redeposits the mess as soon as it rains.
3. Clean & treat
Surface cleaned evenly, with black spot and efflorescence treated chemically rather than driven off with brute pressure.
4. Re-sand & finish
Where joint sand has washed out, we replace it so the pavers stay locked and stable. Full rinse, then photos through to you.
What It Costs
Paving is quoted by area, material and joint condition. The joints are usually what makes a paving job long rather than the surface itself.
- Total paved area — paths, courtyards, pool surrounds and verges
- Paver material, since soft limestone needs low pressure and much more time
- How much weed and grass growth is established through the joints
- Severity of efflorescence, black spot and lichen
- Whether joint sand needs replacing after cleaning
- Access — narrow side paths and terraced levels take longer to work
Efflorescence is worth a specific mention. That white powdery bloom is salt migrating out of the paver or the bedding sand, and it is not dirt — pressure alone will not shift it and it will keep returning until the moisture source settles. We treat it, but we will also tell you honestly if yours is likely to come back.
Why Paving Deteriorates Faster Than You Expect
Jointed paving has more ways to fail than a poured slab, and most of them start out of sight.
Joints wash out
Every rain event and every careless pressure clean removes a little joint sand. Once the joints are empty the pavers start rocking, edges chip, and the surface becomes uneven underfoot.
Roots lift pavers
Weeds in a joint are not just untidy. Established roots exert real force and will lift and tilt individual pavers, which then become trip hazards and let more water into the base.
Pool surrounds get slippery
Algae on a wet pool surround is one of the more genuinely dangerous surfaces around a house. Regular cleaning is a safety measure there, not a cosmetic one.
Paving Cleaning FAQs
Done carelessly with a narrow jet held close, yes — and that is a common complaint after a cheap job. We work at controlled pressure and we quote joint sand replacement where it is needed rather than leaving you with loose pavers.
Yes, and it is very common in WA. Limestone is soft, porous and easily damaged, so it gets low pressure and a treatment-led approach. Anyone offering to blast your limestone is about to ruin it.
Efflorescence — mineral salts migrating to the surface as moisture moves through the paver. It is not surface dirt and it will not simply wash off. We treat it chemically, though on new paving it often keeps recurring for the first year or two until it exhausts itself.
Yes, though it is the most stubborn thing on paving. Those hard black dots are lichen anchored into the surface. They need a proper treatment and time to work, and heavily established black spot sometimes needs a second application.
Yes. We take particular care to control run-off away from the pool and to avoid getting treatment into the water. Tell us at booking that there is a pool so we can plan the drainage.
They will return towards their original colour, which after years of grime can be a surprise. Occasionally a paver that has faded unevenly under a pot plant or furniture leg will still show a patch after cleaning.
Every one to two years for most Perth properties. Shaded paths and pool surrounds go green faster and often want an annual clean. Open, sunny paving can go longer.
We assess the joints and quote it where it is needed rather than charging everyone for it. If your joints are full and stable, you do not need it and we will not sell it to you.
Get Your Paving Clean and Stable Again
Joints cleared, growth treated at the root, and joint sand replaced where it has washed out. Free fixed quote across Perth and WA.